5 Verify operation
5.1 Emerson 781S Smart Antenna
The antenna has no exterior lights or LCD displays. Therefore, once it is
powered up through the Gateway, its operation must be verified through
the Gateway end of the connection.
5.2 Power up sequence
The second and third LED’s in the Emerson 1410S correlate to the first and
second terminal connections. These lights should be green when the
antenna is connected properly.
5.3 Normal operation
The operation of the WirelessHART
®
Smart Antenna can be assessed within
the Gateway user interface. The connection can be seen by allowing the link
to be seen as a field device. The operability can be verified by attempting to
connect to a device.
March 2020 Quick Start Guide
Quick Start Guide 11
To Next Page
Loading...
