6.4 Europe
I1 ATEX Intrinsic Safety
Certificate
SGS20ATEX0038X
Markings
Ex ia IIC T4 Ga (-40°C ≤ Ta ≤ +70°C)
Standards
EN IEC 60079-0: 2018, EN 60079-11: 2012
Special Conditions for Safe Use (X):
1.
The plastic enclosure may constitute a potential electrostatic ignition
risk and must not be rubbed or cleaned with a dry cloth
2. The measured capacitance between the equipment enclosure and
metallic conduit adapter is 21pF. This must be considered only when
the Model 781S is integrated into a system where the process
connection is not grounded.
I1 ATEX Intrinsic Safety
Certificate
SGS20ATEX0053X
Markings
Ex ic IIC T4 Gc (-40°C ≤ Ta ≤ +70°C)
Standards
EN IEC 60079-0: 2018, EN 60079-11: 2012
Special Conditions for Safe Use (X):
1.
The plastic enclosure may constitute a potential electrostatic ignition
risk and must not be rubbed or cleaned with a dry cloth
2. The measured capacitance between the equipment enclosure and
metallic conduit adapter is 21pF. This must be considered only when
the Model 781S is integrated into a system where the process
connection is not grounded.
6.5 International
I7 IECEx Intrinsic Safety
Certificate
IECEx BAS.20.0021X
Markings
Ex ia IIC T4 Ga (–40 °C ≤ Ta ≤ +70 °C)
Standards
IEC 60079-0: 2017, IEC 60079-11: 2011
Special Conditions for Safe Use (X):
1.
The plastic enclosure may constitute a potential electrostatic ignition
risk and must not be rubbed or cleaned with a dry cloth
March 2020 Quick Start Guide
Quick Start Guide 13
To Next Page
Loading...
