Emerson 3051SMV - Section 1 Introduction; Using this manual; Product overview

Reference Manual
00809-0100-4853, Rev AB
Introduction
January 2017
1
Introduction
Section 1 Introduction
1.1 Using this manual
The sections in this manual provide information on installing, operating, and maintaining the
Rosemount
™
3051S MultiVariable
™
FOUNDATION
™
Fieldbus Transmitter (3051SMV). The sections are
organized as follows:
 Section 2: Configuration provides instruction on commissioning and operating the Rosemount
3051SMV and information on flow configuration and device configuration.
 Section 3: Installation contains mechanical and electrical installation instructions.
 Section 4: Operation and Maintenance contains operation and maintenance techniques.
 Section 5: Troubleshooting provides troubleshooting techniques for the most common operating
problems.
 Appendix A: Specifications and Reference Data supplies reference and specification data, as well as
ordering information.
 Appendix B: Product Certifications contains intrinsic safety approval information, European ATEX
directive information, and approval drawings.
1.2 Product overview
This manual covers the Rosemount 3051SMV FOUNDATION Fieldbus Transmitter. The device measures
differential pressure, static pressure and process temperature and has the capability to calculate mass
flow.
The following transmitters are covered in this manual.
Table 1-1. Rosemount 3051SMV Fully Compensated Mass Flow (M) Transmitter
Measurement type Description
1
Differential pressure, static pressure, temperature
2
Differential pressure and static pressure
Table 1-2. Rosemount 3051SMV Process Variables Only (P) Transmitter
Measurement type Description
1
Differential pressure, static pressure, temperature
2
Differential pressure and static pressure