Refer to the AMS 2140 Machinery Health Analyzer User Guide for more
information on setting the connection type on the AMS 2140 and on AMS
Machinery Manager Data Transfer.
Procedure
1.
From the Laser Align Application main menu, press ALT > F9 Job Manager >
F7 Connect for Transfer.
2. Optionally, press F1 Set Storage Location to select the internal memory or
an SD memory card.
This option is available only if a memory card is inserted into the AMS
2140.
3. Press F9 Load Tolerance Table.
4. Press F8 or F9 to select a database containing the tolerance table.
5. Press F7 Load Tolerance Table.
6. Select YES to load the tolerance table and overwrite the existing
tolerance table in the AMS 2140.
December 2018 Quick Start Guide
Quick Start Guide 35
To Next Page
Loading...
