Example system overview drawingFigure 2-2:
A system overview drawing typically includes the following information:
• AMS 6500 units
• Junction/switch boxes
• Cables
• AMS 6500 Network Segment Cables
• Tags for each AMS 6500, junction/switch box, and cable
2.3.2 System layout drawings
The system layout drawings illustrate exact locations for enclosure mounting, conduit
installation, cable pulls, and sensor mounting. The most common method for preparing
these drawings is to copy blueprints of the plant floor/production line and mark the system
installation locations. Use color-coded highlights and symbols to mark the different types
of cable runs and enclosure mountings.
Product Introduction
8 MHM-97125-PBF-EN, R0
To Next Page
Loading...
