A6500MS in a compact wall-mount enclosureFigure 4-4:
A6500MR in a full wall-mount enclosure (48 channels shown)Figure 4-5:
4.3 AMS 6500 rack chassis
To protect it from harsh industrial environments, the AMS 6500 rack chassis is either
mounted on 19 in. rack mounting rails in a cabinet enclosure with rear termination panels,
or in a stainless steel housing with a front termination panel.
Note
All AMS 6500 enclosures must be grounded to earth. Ground the enclosure through conduit or
mounting structure if it is grounded to earth. Otherwise, use a bonding wire to connect the
enclosure to earth ground.
4.3.1 Mount the rack chassis in a 19 in. cabinet enclosure
The AMS 6500 is generally installed in a cabinet enclosure with 19 in. rack mounting rails.
Mounting hardware includes four each of cage nuts, finishing washers, and screws.
Enclosure mounting
MHM-97125-PBF-EN, R0 19
To Next Page
Loading...
