Emerson AMS EZ1000 - Start of an Offline Configuration

Configuration
[46]
8.2 Start of an offline configuration
1. Select Workspace in the left part of the main view, then click Item > Converter > EZ 1000
converter.
Figure 8-3: Start new device configuration
A. Item EZ 1000 converter
B. Workspace
The EZ 1000 converter is added to the list below Workspace.
2. Select an EZ 1000 from the Workspace list, and click Configure.
Figure 8-4: Select an EZ 1000 for offline configuration
A. Button Configure to open the configuration editor.
B. New EZ 1000 converter.
The New Configuration dialog opens.