You can change the mode for a block from the Block List, or you can open a specific block
and change the mode.
Procedure
1. Connect to a FOUNDATION fieldbus device.
2. To change the modes for one or more blocks on the Block List:
a. Tap the mode button on the Block List.
A list of all blocks and the selected modes is displayed.
b. For each block in the list you want to modify, select the block and select the
desired mode.
c. Tap OK.
d. Tap Send.
e. Review the changes.
f. Tap Send.
3. To change the mode from within a block:
a. Go to a block menu in the device.
Field Communicator application
106 User Guide
To Next Page
Loading...
