Emerson AMS Trex - Upgrade Studio

Option Description
Auto adjust daylight savings Enable or disable the Trex unit from automatically adjusting
the time for daylight saving time.
Date Enter the date.
Date Format Select the format for the date. You can select DD/MM/YYYY
or YYYY/MM/DD.
Time Enter the time.
Time Format Select the 12 hour or 24 hour format.
Time Zone Select the time zone.
4. Tap OK.
2.10.9 Calibrate the touchscreen
If the touchscreen seems inaccurate, you can recalibrate it.
Procedure
1.
Note
If your Trex unit is unresponsive to the touch screen, you can navigate to this menu with the
arrow keys, then initiate the calibration.
Tap Settings or the status bar at the top of the screen.
2. Tap More > Display > Calibrate touch screen.
3. Tap the screen as indicated.
2.10.10 Set the language on Trex
Changing the display language requires the AMS Trex unit to be rebooted. Make sure you
have no outstanding changes before changing the display language.
Procedure
1. Tap the toolbar at the top of the screen.
2. Tap More > Language.
3. Select a language, and tap OK.
The AMS Trex unit reboots and the new language is displayed. Not all applications
support all available languages. The Trex unit does not support entering characters
in non-Latin languages.
2.10.11 View the amount of available memory
1. Tap Settings or the status bar at the top of the screen.
AMS Trex Device Communicator overview
32 User Guide