Emerson AMS - Wireless Network Setup

Table 3-2: Permissible wire-cross sections (continued)
Wire description Wire cross-section
Minimum Maximum
CHARM Terminal Blocks Conductor cross section
AWG (stranded or solid)
22 14
The recommended stripping length of the wires is 10 mm.
3.3.1 Wiring overview
See Figure 3-1 for an example overview of a standard wiring of an AMS Asset Monitor.
Installation Guide Planning the installation
MHM-97923-PBF March 2024
MHM-97923-PBF, Rev. 2.10 17