28
February 2020
Installation and Maintenance Instructions
MAN-02-04-99-0712-EN Rev. 1
Lubrication
Section 5: Lubrication
Section 5: Lubrication
5.1 Lubrication Inspection
The actuator is lubricated with grease for the entire duration of its service life; under
normal working conditions, new grease need never be added (nor completely replaced).
For maintenance purposes, the following grease is recommended:
• AEROSHELL GREASE 7 or equivalent, for ambient temperature -40 °C to +70 °C
(-40 °F to +158 °F).
To Next Page
Loading...
