EasyManua.ls Logo

Emerson Bucket Head BH01000 - Cleaning and Storage; Troubleshooting Common Issues; Safety During Maintenance; Replacement Filter Information

Emerson Bucket Head BH01000
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
WARNING: If any of the power head assembly parts should become
detached or broken, exposing motor or any other electrical components,
operation should be discontinued immediately to avoid personal injury or
further damage to the vacuum. This vacuum has no user serviceable parts,
except the filter.
Cleaning
To keep your Wet/Dry Vac looking its
best, clean the outside with a cloth
dampened with warm water and mild
soap.
Electrical Ratings: BH01000 120 V, 4 A, 60 Hz
Storage
Before storing your powerhead, the cord
should be wrapped around the unit to
keep it from getting damaged.
The supply cord cannot be replaced.
If the cord is damaged, the Vac should be
destroyed and replaced.
Replacement filters are available where
you purchased your Vac.
The Stock Number is VF2000.
TROUBLESHOOTING
REPLACEMENT FILTER
MAINTENANCE (continued)
!
Problem Cause Remedy
Vac will not pick up dirt 1. Clogged filter 1. Clean or replace filter (follow
instructions on page 7).
2. Clogged hose 2. Remove hose and clear debris.
3. Air leak 3. Make sure power head is
securely attached to bucket and
the bucket is one of the
designated types.
Vac will not run 1. No electricity 1. Make sure electrical outlet has
voltage. (A qualified electrician
may need to be contacted).
SP6726-4 BUCKET HEAD-9_Bucket Head BH01000 3/29/16 11:23 AM Page 8

Related product manuals