23
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF788
Fan installation must be completed, including the
installation of the fan blades, before testing the remote
control.
WARNING
!
Your Wall Control has full control of your Fan and Light
(Figure 37).
To set the desired Fan Speed, press the ( ) Button
to Decrease the Speed and the ( ) to Increase the
Speed. The LED Display will Light up to indicate the
new speed selected.
To turn the Light ON and OFF, press and release the
LIGHT ( ) Button. To set the Light Intensity, press and
hold the LIGHT ( ) Button. The Light will turn ON at
the Light Intensity previously selected.
Your Wall Control comes complete with your choice
of Three Wall Cover Plates; Ivory, White and Light
Almond.
If Airflow is desired in the opposite direction, press the
( ) Button on the Wall Control. The Fan must be
operating at any Speed for the Reverse Button to
function. The Blades will turn in the opposite direction
and reverse the Airflow.
10. Using Your Ceiling Fan
LIGHT
BUTTON
HIGH TO LOW
SPEED BUTTONS
FAN
DIRECTION
FAN
BUTTON
POWER
INDICATOR
LIGHT
ON/OFF SWITCH
O = OFF / = ON
Figure 37
To Next Page
Loading...
