To Next PageTo Next PageWhat to do if communication between Emerson Copeland CoreSense 971-0065-04 master controller and CoreSense module is problematic?
If you are experiencing communication issues between the Emerson Conference System master controller and the CoreSense module, reversing the polarity might help. Here’s how: 1. Set the CoreSense to negative. 2. Set the master controller to positive. This should re-establish communication.
What does a green flash code 1 mean on Emerson Copeland CoreSense 971-0065-04?
If the Emerson Conference System master controller loses communication for more than five minutes and DIP switch #8 is enabled, the system will communicate this via a green flash code 1.
General| Brand | Emerson |
|---|---|
| Model | Copeland CoreSense 971-0065-04 |
| Category | Conference System |
| Language | English |
Explains essential safety instructions and guidelines for safe operation and maintenance of the equipment.
Defines the meaning of various safety symbols used in the document to alert users to potential hazards.
Details critical safety warnings related to electrical hazards, fire risks, and potential injuries during installation and servicing.
Details the red LED flash codes that signify critical alerts or lockout conditions, indicating potential system faults.
Explains how to configure the module's operating parameters such as Modbus address and baud rate using DIP switches.
Offers guidance and potential solutions for diagnosing and resolving issues related to the CoreSense module and compressor operation.
