5 Setup and programming
Topics covered in this chapter:
•
Function keys and display
•
Button tips
•
Set numeric values
•
Set alphanumeric labels (LAbEL)
•
Main menu
•
Menu display functions
•
Set up the meter
5.1 Function keys and display
Use the infrared through-glass buttons for setup and programming. Use manual buttons
when uncovered. Two slide switches are located on the display module. One is used to
configure the input and the other is used to lock or unlock the infrared through-glass
buttons.
The Display has four infrared through-glass button sensors allowing the Display to be
programmed and operated without removing the cover (and exposing the electronics) in a
hazardous area. These buttons can be disabled for security via the THRU-GLASS BUTTONS
on/off switch on the back of the removable electronics module. Select OFF to disable the
infrared THRU-GLASS buttons.
Button and display symbolsTable 5-1:
Button/Display symbol Description
Menu/Awake
Setup and programming
User manual 29
To Next Page
Loading...
