2 Description
Section 1: Introduction Owner and operator manual
January 2015 3-9008-001 Rev M
Figure 1-1 Daniel Senior
Orifice Fitting - Flangenek option
Therefore, using a Senior may eliminate the need for bypass piping, valves, and other fittings
necessary with conventional orifice fitting installations. Maintenance technicians can replace
and repair all parts of the Senior, including the slide valve assembly, without removing the Body
(4) from the line (refer to Section 3: Maintenance).
Daniel designs and manufactures all Senior units to applicable AGA recommendations and in
accordance with selected ANSI, ASME and ASTM specifications. As an option, Daniel also
designs and manufactures Fittings in compliance with ISO 5167.
To Next Page
Loading...
