Emerson DL8000 - Page 221

DL8000 Preset Instruction Manual
Revised February-2016 DL8000 Keypad Display E-3
Note: The program validates what you can enter in any field. If a field
accepts only numeric values, pressing ALT+1 generates only the
decimal. If the field accepts both alphabetic and numeric values,
pressing ALT+1 displays A, B, C, and the decimal.
Table E-1. Key Functions
Key/Alternate Value
Primary Function
Alternate Functions (ALT+)
ALT
Enables alternative functions on selected
keys
Not applicable
1/ABC. Numeric 1 A, B, C, and “.” (decimal point)
2/DEF- Numeric 2 D, E, F, and “-“ (negative sign)
3 Numeric 3
 Increases display contrast (darken)
when you select either contrast
control menu or brightness control
menu.
Note: This function is available only
in Program mode.
 Moves the display to next logical
when the Status or Setup menu
displays and display is on parameter
screen. For example, if data for
meter 1 (logical 0) is currently on
screen, press ALT+3 to display data
for meter 2 (logical 1).
4/GHI Numeric 4 G, H, I, and “ “ (space)
5/JKL Numeric 5 J, K, and L
6/
Numeric 6
 Decreases display contrast
(brightens) when you select either
contrast control menu or brightness
control menu.
Note: This function is available only
in Program mode.
 Moves the display to previous logical
when the Status or Setup menu
displays and display is on parameter
screen. For example, if data for
meter 2 (logical 1) is currently on
screen, press ALT+6 to display data
for meter 1 (logical 0).
7/MNO Numeric 7 M, N, and O
8/PQRS Numeric 8 P, Q, R, and S
9/TUV Numeric 9 T, U, and V
0/WXYZ Numeric 0 W, X, Y, and Z
CLEAR/EXIT Rejects the manually entered values
Accesses the next-highest menu in
Program mode
SELECT/BKSP
Selects options while in loading or
program mode.
Clears only last character/digit during
data entry