Emerson DL8000 - Preset Quantity; Invalid Preset; Loading

DL8000 Preset Instruction Manual
E-8 DL8000 Keypad Display Revised February-2016
Note: If you defined multiple data items, the DL8000 displays a
data item screen for each data item defined.
 14/02/12 13:58:59
Enter data item #n
(ENTER to Continue)
Recipe #1
[ ]
E.2.5 Preset Quantity
The operator uses this screen to enter the preset quantity.

14/02/12 13:58:59
Enter Preset
Quantity
(ENTER to Continue)
Recipe #1
[ ]
Bbl
Note: Use the Liquid Calcs program’s Liquid Preference screen to
set the units (here, Bbl) on this screen.
E.2.6 Invalid Preset
If the preset verification fails, the DL8000 displays this screen and
provides an explanatory message at the bottom of the screen:
 14/02/12 13:58:59
Invalid Preset...
(Info Message)
Recipe #1
(Press CLEAR)
E.2.7 Loading
To provide the operator with critical feedback, the DL8000 always
presents the loading screen during the definition of the batch
delivery operation or during the transaction (delivery of batch or
group of batches).
Note: The operator can press ALT + → to see dynamic data for
Loading screens 2 and 3.