Emerson E300 Series - Accuracy and Resolution; Acoustic Noise; Overall Dimensions

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
User Menu A Commissioning
Advanced
Parameters
Diagnostics Optimization CT MODBUS RTU
Technical Data
486 E300 Design Guide
Issue Number: 1
12.12 Accuracy and resolution
Speed:
The absolute frequency and speed accuracy depends on the accuracy of the crystal used with the drive microprocessor. The accuracy of the crystal
is 100 ppm, and so the absolute frequency/speed accuracy is 100 ppm (0.01 %) of the reference, when a preset speed is used. If an analog input is
used the absolute accuracy is further limited by the absolute accuracy of the analog input.
The following data applies to the drive only; it does not include the performance of the source of the control signals.
Open loop resolution:
Preset frequency reference: 0.1 Hz
Precision frequency reference: 0.001 Hz
Closed loop resolution
Preset speed reference: 0.1 rpm
Precision speed reference: 0.001 rpm
Analog input 1: 11 bit plus sign
Analog input 2: 11 bit plus sign
Current:
The resolution of the current feedback is 10 bit plus sign.
Accuracy: typical 2 %
worst case 5 %
12.13 Acoustic noise
The heatsink fan generates the majority of the sound pressure level at 1 m produced by the drive. The heatsink fan on size 3 is a variable speed fan. The
drive controls the speed at which the fan runs based on the temperature of the heatsink and the drive's thermal model system.
Table 12-3 gives the sound pressure level at 1 m produced by the drive for the heatsink fan running at the maximum and minimum speeds.
Table 12-3 Acoustic noise data
12.14 Overall dimensions
H Height including surface mounting brackets
W Width
D Projection forward of panel when surface mounted
F Projection forward of panel when through-panel mounted
R Projection rear of panel when through-panel mounted
Table 12-4 Overall drive dimensions
Size
Max speed
dBA
Min speed
dBA
33530
44035
5
64840
7
Size
Dimension
HWD F R
3
382 mm
(15.04 in)
83 mm
(3.27 in)
200 mm (7.87 in) 134 mm (5.28 in)
67 mm (2.64 in)
4
391 mm
(15.39 in)
124 mm
(4.88 in)
66 mm
(2.59 in)
5
391 mm
(15.39 in)
143 mm
(5.63 in)
202 mm
(7.95 in)
135 mm
(5.32 in)
67 mm (2.64 in)
6
391 mm
(15.39 in)
210 mm
(8.27 in)
227 mm
(8.94 in)
131 mm
(5.16 in)
96 mm
(3.78 in)
7
557 mm
(21.93 in)
270 mm
(10.63 in)
279 mm
(10.98 in)
187 mm
(7.36 in)
92 mm
(3.62 in)