Emerson EWC19T4 - Page 10

- 10 - EN
1C29
46
48
47
ANT.
AUDIO OUT
COAXIAL
19. VIDEO input Jack
Connect to the video output jack of a video
camera or VCR.
20. AUDIO L/R input Jacks
Connect to the audio output jacks of a video
camera or VCR.
21. Cassette compartment
22. PICTURE Button
Press to adjust the picture.
23. Number Buttons
TV/VCR Mode:
[P.18]
Press two digits to directly access the desired
channel.
Remember to press a “0” before a single digit
channel.
+100 Button–
Press to select cable channels which are equal or
greater than number 100.
DVD Mode:
Press to enter the desired number.
+10 Button–
Press to enter the desired numbers which are
equal or greater than number 10.
24. PAUSE Button [TV/VCR P.26 / DVD P.38]
Pauses the current disc or tape operation.
25. SPEED Button [TV/VCR P.30]
Press to choose the desired recording speed: SP/SLP.
26. C.RESET Button [TV/VCR P.28]
Press to reset counter to 0:00:00.
Press to cancel a setting of timer program.
(See page 33.)
27. DISPLAY Button
TV/VCR Mode:
Display the counter or the current channel number
and current time on the TV screen.
DVD Mode: [P.43]
Displays the current status on the TV screen for
checking purposes.
28. SETUP Button [TV/VCR P.15] [DVD P.44-46]
Press to enter or exit the TV menu or DVD setup
mode.
29. TITLE Button [DVD P.37]
Displays the title menu.
30. CLEAR Button
Resets a setting.
31. MODE Button [DVD P.40]
Activates program playback or random playback mode.
32. SEARCH MODE Button [DVD P.39]
Press to locate a desired point.
33. AUDIO Button [DVD P.42]
Press to select a desired audio language or sound
mode.
34. SUBTITLE Button [DVD P.42]
Press to select a desired subtitle language.
35. REPEAT Button [DVD P.40]
Repeats playback of the current disc, title, chapter,
group or track.
36. ANGLE Button (DVD mode) [DVD P.42]
Press to change the camera angle to see the
sequence being played back from a different angle
if available.
37. A-B REPEAT Button [DVD P.40]
Repeats playback of a selected section.
38. RETURN Button
Returns to the previous operation in the DVD
setup mode.
39. ENTER Button
Press to accept a setting.
40. Arrow Buttons
TV/VCR Mode:
Press to select a setting mode from the menu on
the TV screen.
Press to select or adjust from a particular menu.
DVD Mode:
Use when making settings while watching the
display on a TV screen.
41. DISC MENU Button [DVD P.37]
Displays the menus in the DVD.
42. V. SURR (VIRTUAL SURROUND) Button [DVD P.42]
Sets virtual surround on/off.
43. MUTE Button
Mutes the sound. Press it again to resume sound.
44. SLEEP Button [TV/VCR P.34]
Sets the Sleep Timer.
- REAR PANEL - [Fig.3]
T0052UC(p1-35).QX3 04.9.16 2:13 PM Page 10