Emerson EWFG2705 - Changing the Screen Display Mode

19
EN
CHANGING THE SCREEN DISPLAY MODE
2 types of display mode can be selected in the digital
mode.
You can select your favorite display mode and enjoy
the program.
1
Display the MENU screen.
• Press
[MENU] on the remote control.
The following MENU screen is displayed.
2 Select "DTV SET UP".
• Using
[CH
K
/
L
] on the remote control, select
"DTV SET UP".
• When you press
[VOL
X
] on the remote control,
the MENU screen will be displayed as below.
DTV DISPLAY [LETTERBOX]
DTVCC
D.S.T.[Daylight Saving] [ON]
TIME ZONE [ALASKA]
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
DTV SET UP
PICTURE
CHANNEL SET
[ENG]/ESP/FRA
V-CHIP SET UP
CAPTION [OFF]
DTV SET UP
CH
CH
VOL VOL
CHANNEL
RETURN
–
/ENT
INPUT
SELECT
321
654
98
+
100
0
7
MUTE
SLEEP
MENU
MENU
CH
K
/
L
VOL
X
/
Y
DTV
3 Select the display mode.
• Every time you press
[VOL
X
/
Y
] on the remote
control, [LETTERBOX] and [ZOOM] will be
switched alternately.
[LETTERBOX]
Display the digital-supported program in full-
screen.
Black borders will spread in the upper and
lower screen.
[ZOOM]
Enlarge and display the center area of the digital-
supported program.
The right and left image will be cut off.
4 To exit the menu, press [MENU] on the remote
control.
NOTE:
You may not switch the display mode depending on the pro-
gram.
D10-0
ZOOMLETTERBOX
D10-0
WATCHING TV