1-2 L5001SP
< AUDIO >
All items are measured across 8 Ω load at speaker output terminal with L.P.F.
Note: Nominal specifications represent the design specifications. All units should be able to approximate these.
Some will exceed and some may drop slightly below these specifications. Limit specifications represent
the absolute worst condition that still might be considered acceptable. In no case should a unit fail to meet
limit specifications.
Description Condition Unit Nominal Limit
1. Audio Output Power 10% THD: Lch/Rch W 5.0/5.0 4.5/4.5
2. Audio Distortion 500mW: Lch/Rch % 1.0/1.0 4.0/4.0
3. Audio Freq. Response
-
6dB: Lch
-
6dB: Rch
Hz
Hz
100 to 10 k
100 to 10 k
---
---
To Next Page
Loading...
