77
VCR functions
Recording
Playing discs
Editing
Before you start
Connections
Getting started
Changing the Setting menu
VCR functions
Other operations
First:
Fast forward:
When the unit is in stop mode, hit [g] to fast forward the videotape.
Rewind:
When the unit is in stop mode, hit [h] to rewind the videotape.
To cue or review picture during playback (Picture Search):
Press [g/h] during playback.
Press it again and the unit will search in super high speed. (in the SLP mode only)
To freeze the picture on TV screen during playback (Still mode):
Hit [PAUSE F]. Each time you hit the button, the picture will be for-
warded by one frame.
If the picture begins to vibrate vertically during the still mode, stabilize
the picture by pressing [CHANNEL K / L] or [CH K / L].
If the picture is distorted or rolling vertically, adjust the vertical hold
control on your TV, if equipped.
Counter Reset:
Hit [CLEAR].
To playback in slow motion:
Hit [SLOW ] during playback or the still mode.
If the noise bars appear on the TV screen, you can reduce it by pressing
[CHANNEL K / L] or [CH K / L].
Automatic Rewind
When a videotape is played or fast forwarded to its end, the videotape
will rewind to the beginning, stop and eject itself.
When you playback a videotape recorded in Hi-Fi stereo:
Hit [AUDIO] on the remote control to select Hi-Fi or MONO for
playback sound mode.
• If you have connected a stereo TV to this unit, select “HIFI”.
• If you have connected a monaural TV to this unit, select “MONO”.
VCR
VCR
Note
• Still/Slow/Pause mode will be
automatically cancelled after 5
minutes to prevent damage to
the videotape and the video
head.
• To return to playback from
the Picture Search/Still/Slow
mode, hit
[PLAY B].
Search (cont’d)
HIFI
Your Selection
Type of recorded tape
non Hi-Fi tapes
Hi-Fi tapes
recorded in
Hi-Fi stereo
Hi-Fi tapes
recorded second
audio program
Hi-Fi tapes
recorded main
audio program
MONO
Monaural
L+R
Main audio
program
Second audio
program
Monaural
R-channelL-channel
R
Main audio
program
Second audio
program
Monaural
L
Main audio
program
Second audio
program
Time search
Note
• Index search and Time search are not available during
recording.
• Hit [STOP C] to stop the search.
• If the end of the videotape is reached during a Search, this unit will
cancel the search and rewind the videotape.
This function allows you to go to a
specific point on a videotape by
entering the exact amount of time
you wish to skip in order to reach
the point.
First:
1
Hit [SEARCH] repeatedly so
that the Time search menu
appears.
2
Using the Number buttons,
enter your desired time to
skip with in 30 seconds.
3
Press [g/h] to start time
search.
If you want to go in the forward
direction, hit
[g]
.
If you want to go in the reverse
direction, hit
[h]
.
After time search, the unit will play
the videotape automatically.
TIME SEARCH
2:50
VCR
VCR
VCR
STOP
POWER
T-SET
TIMER PROG.
SKIP SKIP
OPEN/CLOSE
SPACE
123
456
78
0
9
CH
VIDEO/TV
SLOW
PAUSE
.@/:
ABC DEF
GHI JKL MNO
PQRS
REC/OTR
DISPLAY
TUV WXYZ
DVD
REC/OTR
REC SPEED
ZOOM
SEARCH
VCR
SETUP
CM SKIP
RETURN
MENU/LIST
TOP MENU
DUBBING
REC MONITOR
CLEAR
ENTER
PLAY
AUDIO
1
3
2
Others Español
E9600UD_EN/SP.qx3 05.4.25 15:16 Page 77
To Next Page
Loading...
