Instruction Manual
D101322X012
1051 and 1052 Size 33 Actuators
June 2017
27
Figure 13. Parts Used for the J Mounting Adaptation
50B1584‐C
A3781‐1
NOTE:
REQUIRES APPROPRIATE LEVER (KEY 27) FOR J MOUNTING ADAPTATION ‐ SEE PARTS LIST.
2. STYLE A MOUNTING SHOWN. FOR STYLE B, ASSEMBLE PARTS LISTED AND TRAVEL INDICATOR COMPONENTS ON OPPOSITE ENDS OF LEVER.
1
1051
KEY
1052
KEY
Parts Used For J Mounting
Adaptations (figure 13)
Key Description
Parts For Use With 1051 Actuators Only
44 Pin, steel (for coupler)
79 Pin, steel (for stub shaft)
80 Coupling, steel
81* Woodruff key, steel
For 3/8, 1/2 inch valve shaft size
For 5/8 inch valve shaft size
87 Stub shaft, steel
Key Description
Parts For Use With 1052 Actuators Only
89 Pin, steel (for stub shaft)
90 Coupling, steel
91* Woodruff key, steel
For 3/8, 1/2 inch valve shaft size
For 5/8 inch valve shaft size
119 Pin, steel (for coupler)
120 Stub shaft, steel
*Recommended spare parts
To Next Page
Loading...
