EasyManua.ls Logo

Emerson Fisher 2052 - Parts Ordering; Parts List; Actuator Locking Mechanism Kits

Emerson Fisher 2052
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instruction Manual
D103296X012
2052 Actuator
June 2017
17
WARNING
To avoid personal injury or property damage, be aware the travel indicator scale (key 19) retains the locking shaft (key 50)
during normal actuator operation. Removal of the travel indicator scale could allow the locking shaft to fall out in certain
actuator orientations.
Parts Ordering
When corresponding with your Emerson sales office or Local Business Partner about this equipment, refer to the serial
number found on the actuator nameplate.
WARNING
Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Automation Solutions should
not, under any circumstances, be used in any Fisher valve, because they may void your warranty, might adversely affect the
performance of the valve, and could cause personal injury and property damage.
Parts List
Note
Contact your Emerson sales office or Local Business Partner for Part
Ordering information.
Key Description
1 Housing Assembly
1a*  Bushing
2 Cover or Plug
3 End Plate Assembly
3a*  Bushing
4 Cap Screw
5 Top Casing Assembly
6 Diaphragm Plate
7 Cap Screw
8 Cap Screw
9 Hex Nut
10 Diaphragm Rod Assembly
11* Diaphragm
 Molded nitrile/nylon
  Standard Construction
 Molded silicone/polyester
  Standard Construction
12 Spring, Inner
13 Spring, Outer
14 Lever
15 Cap Screw
16 Cap Screw
Key Description
17 Hex Nut
18 Insert
19 Travel Indicator Scale
20 Self Tapping Screw
21 Travel Indicator
22 Machine Screw
23 Cap Screw
24 Hex Nut
25 Cover Plate
26 Cap Screw
27 Mounting Yoke
28 Cap Screw
29 Label
30 Nameplate
31 Drive Screw
32 Handwheel
33 Slotted Hex Nut
34 Cotter Pin
35 Screw
36 Pusher Assembly
37 Groove Pin
41 Warning Label
42 Washer
43 Hex Nut
44* O‐Ring
45 Lubricant
46 Lubricant
47 Vent Screen
48* Guide Assembly
49 Lockout Kit
Kits for Actuator Locking Mechanisms are available to keep the actuator in a locked position, the same as spring-fail,
during maintenance. (Padlock is customer supplied). Not compatible with the declutchable handwheel on size 2 and 3
actuators.
Kits
Description Part Number
Size 1 GE51941X012
Size 2 GE52968X012
Size 3 GE52968X022
*Recommended spare parts

Related product manuals