Emerson Fisher 4211 - Parts for Mounting the Transmitter

4200 Series Transmitters
Instruction Manual
Form 5596
November 2006
29
PICK-UP PIN, TRANSFER PIN, HEX NUT, AND HEX CAP SCREW ARE PART OF LEVER ASSEMBLY PART NUMBER 16A6706X012
PICK-UP PIN
TRANSFER
PIN
LEVER
ASSEMBLY
HEX NUT
PICK-UP PIN
TRANSFER
PIN
HEX CAP
SCREW
LEVER
ASSEMBLY
NOTES:
PICK-UP PIN IN
CONNECTION NUMBER 1
PICK-UP PIN IN
CONNECTION NUMBER 2
1
2
1
1
2
2
2
2
2
39A7768-B / IL
V APPLY LUBRICANT
PICK-UP PIN AND TRANSFER PIN ARE PART OF LEVER ASSEMBLY PART NUMBER 16A6705X012
OPERATING
ARM
OPERATING
ARM
ACTUATOR YOKE
ACTUATOR STEM
CONNECTION
PICKUP PIN
CONNECTION
NUMBER 2
PICKUP PIN
CONNECTION
NUMBER 1
1
TRAVEL,
mm (Inch)
Up to 54 (2.125) max
Up to 105 (4.125) max
PICK-UP PIN
CONNECTION
NUMBER
1
2
Figure 15. Typical Transmitter Mounting on Type 470, 471, 470-7, 471-7 (585C Size 60 Thru 130), 657, or 667 Actuator
Key Description Part Number
32 Cap Screw, pl steel (2 req’d) 1C631224052
33 Stem Bracket, zn pl steel
Size 30 thru 130
with 54 mm (2.125 inch) max travel l6A6709X012
Size 80 thru 130 w/ 54 thru 105 mm
(2.125 thru 4.125 inch) max travel 16A8277X012
34 Stem Mounting Bracket, zn pl steel
Size 30, 40, 45, 63, 64 16A0430X012
Size 46, 60, 68, 80, 86, 130 27A5447X012
Size 100 21B5965X012
35 Cap Screw, zn pl steel (2 req’d)
Size 30, 45 1A352524052
Size 40 1A553424052
Size 64 1A375124052
Size 68, 80 10A5001X012
Size 100 1U625631192
36 Sleeve, acetal 16A0428X012
37 Cap Screw, steel (2 req’d) 16A0429X012
38 Stem Washer (2 req’d)
Size 30 thru 46, pl steel 1B865928982
Size 60 thru 64, zn pl steel 1H723125072
Size 68 thru 130, zn pl steel 1K899525072
Key Description Part Number
39 Stem Spacer (2 req’d)
Size 30, 45, steel 1F9067X0012
Size 40, steel 1J830724092
Size 64, steel 1J830724092
Size 68, 80, zn pl steel 16A1367X012
Size 100, steel 1V683324092
48 Lithium grease (not furnished with transmitter)
49 Thread Locking Adhesive (medium strength) (not furnished with
transmitter)
51 Thread Locking Adhesive (mild strength) (not furnished with
transmitter)
Parts for Mounting the Transmitter on
Type 470-7 and 471-7 (585C, size 60 thru
130) Actuator (figure 15)
21 Mounting plate, steel 37A5448X542
23 Cap Screw, zn pl steel (2 req’d) 1A381624052
24 Washer, pl steel (2 req’d) 1B865928982
25 Operating Arm, pl steel 19A3811X012
26 Cap Screw, pl steel 1H3284X0012
27 Square Nut, pl steel 16A6711X022
29 Torsional Spring, zn pl steel 19A3812X012
30 Lever Assembly 16A6706X012