Emerson Fisher 627H - Page 15

627 Series
15
Key Description Part Number
4* Diaphragm Case O-ring
Nitrile (NBR)
For Type 627, 627H, or 627R only 17A2325X022
Fluorocarbon (FKM)
For Types 627, 627R, and 627LR only 10A0037X012
5 Diaphragm Case
For Type 627, 627R, or 627LR
Aluminum without 1/8-inch / 3.2 mm gauge tap 40B3084X012
Aluminum with 1/8-inch / 3.2 mm gauge tap
for 627 Series (except Types 627H and 627HM) 11B5380X012
Ductile iron without 1/8-inch / 3.2 mm gauge tap 30B3053X012
Ductile iron with 1/8-inch / 3.2 mm gauge tap
for 627 Series (except Types 627H and 627HM) 31B0641X012
For Type 627, 627R, or 627LR
Steel 30B3104X012
Ductile iron with 1/4 NPT gauge tap for
627 Series (except Types 627H and 627HM) 39A5987X012
Steel with 1/4 NPT gauge tap for 627 Series
(except Type 627H) 30B8734X012
For Type 627M or 627MR
Ductile iron 39A5987X012
Steel 30B8734X012
For Type 627H, Steel 30B3104X012
For Type 627, Stainless steel 30B3104X082
For Type 627HM, Steel 30B8734X012
6 Boost Body (not for Type 627M, 627HM,
or 627MR), Delrin
®
For Type 627 or 627H 30B3056X012
For Type 627R or 627LR 30B3057X012
7 Stabilizer
Nitrile (NBR)
For Types 627, 627H, 627R, and 627LR only 10B3060X012
Fluorocarbon (FKM)
For Types 627, 627R, and 627LR only 10B3060X022
8 Stem Guide (for Types 627, 627H, 627R, and
627LR only), Powdered metal 20B3061X012
9* Disk Assembly (for all Orice Size)
Aluminum holder and Nitrile (NBR) disk 1C4248X0212
303 Stainless steel holder and Nitrile (NBR) disk 1C4248X0202
Aluminum holder and Nylon (PA) disk 1C4248X00A2
303 Stainless steel holder and Nylon (PA) disk 1C4248X0062
316 Stainless steel holder and Nylon (PA) disk 1C4248X0262
316 Stainless steel holder and Nitrile (NBR) disk 1C4248X0252
303 Stainless steel holder and
Fluorocarbon (FKM) disk 1C4248X0052
Aluminum holder and Fluorocarbon (FKM) disk 1C4248X0182
316 Stainless steel holder and
Fluorocarbon (FKM) disk 1C4248X0192
10 Stem
303 Stainless steel 10B3059X012
316 Stainless steel (NACE) 10B3059X022
11* Stem O-ring
Nitrile (NBR) 1D687506992
Fluorocarbon (FKM) For Types 627, 627R,
627LR, 627M, and 627MR only 1N430406382
12* Stem Back-up Ring,
Polytetrauoroethylene (PTFE) (2 required) 1K786806992
13 Hair Pin Clip, Stainless steel 10B3058X012
14 Drive Pin, Plated steel 1H3671X0012
15 Lever, Plated steel 20B3063X012
16 Lever Retainer, Plated steel 30B3097X012
17 Lever Pin
Stainless steel 10B3083X012
316 Stainless steel (NACE) 10B3083X022
Key Description Part Number
1 Body
(1)
(continued)
Steel, CL150 RF anged
290 psig / 20.0 bar maximum inlet pressure
NPS 1 / DN 25 43B8656X022
NPS 2 / DN 50 44B0666X012
Steel, BWE
1000 psig / 69.0 bar maximum inlet pressure
NPS 1 / DN 25 33B6723X012
NPS 2 / DN 50 38B1688X012
Steel, PN 16/25/40 RF
580 psig / 40.0 bar maximum inlet pressure
NPS 1 / DN 25 44B0386X012
NPS 2 / DN 50 44B3342X012
Stainless Steel
(2)
, NPT
2000 psig / 138 bar maximum inlet pressure
3/4 NPT 30B3050X062
1 NPT 30B3051X092
2 NPT 30B7452X052
Stainless Steel
(2)
, CL150 RF anged
275 psig / 18.9 bar maximum inlet pressure
NPS 1 / DN 25 43B8656X052
NPS 2 / DN 50 44B0666X022
Stainless Steel
(2)
, CL300 RF anged
720 psig / 49.6 bar maximum inlet pressure
NPS 1 / DN 25 41B8978X072
NPS 2 / DN 50 41B8080X072
Stainless Steel
(2)
, CL600 RF anged
1440 psig / 99.2 bar maximum inlet pressure
NPS 1 / DN 25 40B6754X102
NPS 2 / DN 50 40B6756X062
Stainless Steel
(2)
, PN 16/25/40 RF
580 psig / 40.0 bar maximum inlet pressure
NPS 1 / DN 25 44B0386X032
NPS 2 / DN 50 44B3342X032
2* Orice
Aluminum
3/32 inch / 2.4 mm 0R044109022
1/8 inch / 3.2 mm 1A936709012
3/16 inch / 4.8 mm 00991209012
1/4 inch / 6.4 mm 0B042009012
3/8 inch / 9.5 mm 0B042209012
1/2 inch / 13 mm 1A928809012
303 Stainless steel
3/32 inch / 2.4 mm 0R044135032
1/8 inch / 3.2 mm 1A936735032
3/16 inch / 4.8 mm 00991235032
1/4 inch / 6.4 mm 0B042035032
3/8 inch / 9.5 mm 0B042235032
1/2 inch / 13 mm 1A928835032
316 Stainless steel, NACE construction only
3/32 inch / 2.4 mm 0R0441X0012
1/8 inch / 3.2 mm 1A9367X0022
3/16 inch / 4.8 mm 009912X0012
1/4 inch / 6.4 mm 0B0420X0012
3/8 inch / 9.5 mm 0B0422X0012
1/2 inch / 13 mm 1A9288X0012
3 Cap Screw (not shown), (2 required)
627 Series
For Ductile iron/Steel diaphragm case 1A560724052
For Aluminum diaphragm case
(not applicable for Types 627H and 627HM) 1A352524052
Type 627 Only
For Ductile iron/Steel diaphragm case 1A5607X0052
For Aluminum case with Steel diaphragm case 10A3869X012
For SST Case and body 1A5607X0052
For Aluminum Case and SST body 10A3869X022
*Recommended spare part.
1. Bodies can be used for both standard and NACE constructions.
2. Stainless steel body material can be used for applications in temperature ranges down to -40°F / -40°C and are only available for Types 627, 627R, and 627H.
Delrin
®
is a mark owned by E.I. du Pont de Nemours and Co.