EasyManua.ls Logo

Emerson Fisher Vee-Ball V300 - Repair Kits and Part Numbers

Emerson Fisher Vee-Ball V300
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instruction Manual
D101554X012
Vee-Ball Valves
March 2021
42
Repair Kits for ENVIRO‐SEAL Packing
Repair kits include valves parts for shallow (single packing depth) for ENVIRO‐SEAL packing box construction. Repair
kits include single PTFE or graphite packing. See following table.
ENVIRO‐SEAL Packing Repair Kits
SHAFT DIAMETER
(1)
PART NUMBER
mm Inches PTFE Graphite
12.7 1/2 RRTYX000012 13B8816X012
15.9 5/8 RRTYX000022 13B8816X032
19.1 3/4 RRTYX000032 13B8816X052
25.4 1 RRTYX000052 13B8816X092
31.8 1‐1/4 RRTYX000062 13B8816X112
38.1 1‐1/2 RRTYX000072 13B8816X142
Parts Included in Kit
Key Description Quantity
105 Packing set 1 1
106 Anti‐extrusion washer 2 ‐ ‐ ‐
(2)
1. Diameter through the packing box.
2. Included in key 105.
Repair Kits for Ball Seals
Seal repair kits include recommended spare parts for Fisher TCM Plus, S31600 stainless steel, CF10SMnN, or
CD7MCuN ball seal constructions. The following table indicates the repair kit part number and the quantity of parts
included in the kit.
Fisher V150, V200, and V300 Repair Kits
VALVE SIZE
KIT PART NUMBER
Ball Seal Material
DN NPS TCM Plus - - - Alloy 6
CD7MCuN
(Alloy 255 Duplex SST)
25
40
1
1-1/2
RV150X00CA2
RV150X00CB2
‐ ‐ ‐
‐ ‐ ‐
RV150XHDAA2
RV150XHDAB2
RV150XHDCA2
RV150XHDCB2
VALVE SIZE Ball Seal Material
DN NPS TCM Plus
S31600
(316 SST)
CF10SMnN
CD7MCuN
(Alloy 255 Duplex SST)
50
50
80
100
150
200
250
300
2
(1)
2
(2)
3
4
6
8
10
12
RV150X00C12
RV150X00C82
RV150X00C22
RV150X00C32
RV150X00C42
RV150X00C52
RV150X00C62
RV150X00C72
RV150X00M12
‐ ‐ ‐
RV150X00M22
RV150X00M32
RV150X00M42
RV150X00M52
RV150X00M62
RV150X00M72
RV150X0HD12
RV150X0HD82
RV150X0HD22
RV150X0HD32
RV150X0HD42
RV150X0HD52
RV150X0HD62
RV150X0HD72
RV150XHDC12
RV150XHDC82
RV150XHDC22
RV150XHDC32
RV150XHDC42
RV150XHDC52
RV150XHDC62
RV150XHDC72
Parts Included in Kit
Quantity in Kit
Key No. Description
11
12
13
13
Ball seal
Shim seal
(3)
Spring seal
Wave spring
1
‐ ‐ ‐
‐ ‐ ‐
‐ ‐ ‐
1
4
1
‐ ‐ ‐
1
‐ ‐ ‐
‐ ‐ ‐
1
1
‐ ‐ ‐
‐ ‐ ‐
1
15
37
21
22
Gasket
Radial seal
Retainer screw
Retainer washer
1
‐ ‐ ‐
2 or 4
(4)
2 or 4
(4)
1
‐ ‐ ‐
2 or 4
(4)
2 or 4
(4)
1
1
2 or 4
(4)
2 or 4
(4)
1
1
2 or 4
(4)
2 or 4
(4)
1. V150’s only for serial numbers below 12551183.
2. V150’s for serial numbers 12551183 and above. All V200’s and V300’s.
3. Fewer shim seals are furnished in the parts kits than are used in the original construction of the valve. Most original shim seals can be reused.
4. A quantity of 2 is supplied for NPS 2 through 8 valves, and a quantity of 4 is supplied for NPS 10 and 12 valves.

Related product manuals