Hydrastep 2468CB & 2468CD Manual Remote Display Options 24683B, C & D
24685034 4-9
4.4.2 EXAMPLE OF A ‘STAR CONNECTED’ SYSTEM
Figure 4.4 shows two remote displays connected in a ‘star’. Where more than one remote
display is in use, local supplies with isolated outputs must be used to power the extra unit(s).
Up to six remote displays can be supported (less their power requirements): with the full
complement of units in use, three signal carrying conductors must be connected to each
terminal.
Figure 4.4 - Star connection example for two remote displays
To Next Page
Loading...
