Need help?Do you have a question about the Emerson Klauke EKM 60IDCFM and is the answer not in the manual?
General| Battery Voltage | 18 V |
|---|---|
| Crimping Force | 60 kN |
| Crimping Cycle Time | Approx. 5 seconds |
| Tool Type | Battery-powered crimping tool |
| Battery Type | Lithium-Ion |
| Length | 440 mm |
Details the 2-year warranty for the Made in Germany product.
Recommends servicing by an Authorized Service Center (ASC) every 10,000 operations or 3 years.
Visual overview of key features like AUTO, MAN, and IPS operation modes.
Explanation of date code format and product identification markings like FCC ID.
Emphasizes reading all safety warnings, instructions, illustrations, and specifications before use.
Provides technical details including dimensions, weight, noise levels, and operating temperature range.
Lists compatible Makita battery models (BL18xx) and their respective runtimes.
Details the specifications and compatibility of the Makita DC18RC battery charger.
Information on where to access additional product manuals online.
Explains the meaning of various LED indicators during tool operation.
Visual indicators for battery charge level and warnings for tool overheating.
Description of operating modes such as Manual (MAN) and Quick Stop functions.
Step-by-step guide for battery installation and basic jaw operation.
Details on die alignment, engagement, and the audible 'CLICK' indicator.
Visuals of LED status and 'PRESS' function during the crimping cycle.
Visual guide detailing sequential steps for performing a crimp.
Visual confirmation indicator for a successfully completed crimp.
Displays next service interval, total operating hours, and number of crimps.
Information on the error code display and a list of error code explanations.
Details on screen information (battery, pressure) and user menu navigation.
Information about the Klauke i-press® software and mobile application.
Instructions for downloading and operating the Klauke i-press® app.
Notices regarding FCC and Industry Canada compliance.
Visual guide to essential safety checks required before operating the tool.
Summary of annual maintenance checks, service intervals, and warranty period.
Guidelines and contact information for proper product disposal (WEEE).
Explanation of various service and LED indicator combinations and their meanings.
Detailed description of error conditions and their potential causes.
Procedure for restarting the tool after specific error conditions occur.
Details error indicators for situations where required pressure is not achieved.
Specifications for copper tubular cable lugs and connectors.
Specifications for copper solderless terminals and pin terminals.
Specifications for aluminium compression cable lugs and connectors.
Specifications for aluminium and Al/Cu cable lugs and connectors.
Specifications for aluminium/copper (Al/Cu) cable lugs and connectors.
Compatibility chart for copper connector series (Q, F, R, L).
Compatibility chart for aluminium connector series (AL).
Recommendations for the number of crimps required for specific applications.
Declaration of conformity with relevant machinery and EMC directives.
Company address and contact information for Gustav Klauke GmbH.
Declaration of conformity with Radio Equipment Directives (RED).
To Next Page