10
PREPARATION
' £_..... _ ......
Before you connect:
Be sure your antenna or other device is connected properly
before plugging in the AC power cord.
Antenna Connection
Connect the RF coaxial cable on your home outlet to the
antenna nput jack of this unt.
VHF/UHF analog
oTv......oar'1
i
RF coaxial cable
: °
cable TV signal
Once connections are completed.turn on the unt and begn
nitial setup. Channel scann ng s necessary for the unit to
memorize all ave lable channels n your area. [Initial Setup]
,,._ p.11
Not:r,
If you h_ve any quest}on about the DTV's antelma, vat
www.antennsweb.org for furthel nformation.
Depending on your antenna system, you may need d fic,_nt types
of comb}he1 s (mixers) or separators (sp ittel s) fur HD FV sgna
the rain mum RF bandpass on these devces is 2,000NHz ol- 2OHz.
Fol youl- safety and to avod damage to this unit, please unpug the
RF coaxa cable fl_m the antenna input jad< before movng the
unit.
If you did use an antenna to mceve anaog I\/, t should aso
wolk for DTV mcept on. Outdoor or attc al,tennas w be more
efi<,ct ve than a sot top or inside antenna.
lb switch your mcept on source easily between antenna and cabe.
nstall an antelma selectols
If you are not roceiv ng a sgna from your cable serv ce. contact the
(-abe prov det:
Connection to Cable Receiver or
Satellite Box
Use an HDbql or ComponentV_deo cables to connect the
HDMI or the ComponentV_deo Input lacks of the unit to the
HDMI or the ComponentV_deo output jacks of the cable
receiver/satellite box.
If you connect to the unit's ComponentV_deo Input jacks,
connect Analog Au@o cables to the Ana og Audio L/R input
_acks right beside the Component Video connector jacks.
satellite dis_
HDMI cable
cable receiver/
'_'_P_ satellite box
A
_rea/muelgreen) ana aualo caDle_
lOU can aso cent/oct m • unff to The cable receiver OF satdhte
DOX other than the HDPll or the Component Video output jacks
sr Con DOSlte vlaeo OU_DUI laU ( ,_ p.25, 26) because they
]/8nt have different OutDU_ _CK<
Reauweo (aD_es _t_a connecting ]/etnoas of the cable receiver/
satellrte box, or the ava@bliity channel for the dear OAN may
differ depen@ng on the cabJe/satellite provider or IocaJ ] V
broadcastel:
[or more _nformatlon, please contact your cabJe/saCeJkfe plx)vlder
or JocalTV broadcasten
• Use an HDPll cabe w£h the HDPll ego (_ ce_tfied HDMI cabe).
H_ghSpeed HDNI cab e _srecommended for the better compat_bi t}4
Plug In theAC Power Cord
Make sure that the AC power cord must be plugged to an AC
outlet after all the necessary connections are made.
Caution:
Do not connect the AC powe_- cold to a power suppy outs de
the nd cared votage ofths unit (AC 120V).
Connecting the AC powel- cord to a power suppy outs de of this
range may resut in fire or eectr ca shocks.
N£e be
Each time you pug n the AC power cord, no operations will
performed for afr, w seconds.This is not a malfunct on.
To Next Page
Loading...
