22
ECO
You can turn on ECO Node to conserve powec
ECO mode', ON s ENERGY S[TXR _'_qualified sett ng.
1 Use _/T to select [ECO],then press OK.
_2 Use A/_' to select the desired mode, then press OK.
On _sun_pt o_
IPowel tor_sun'pt ol_ may exceed ENERGY SIAR ®
Off !q_ m ts.
Note
• You must sct [Home] in [Location]. ,,_ p.23
Othet_/se, the sc,l¢}ngs you adjusted vvil not be saved when the
un}t goes into standby mode.
• You can also press ECOJ directly to switch the desired setting.
,._, p.14
Auto TV On
Ths unt will turn on when the power on sgnal is sent fi'om
your connected fun Link device.
Use A/T to select the desired setting, then press OK.
On Ths unit tul-ns on automat ca y when you turn on
your connected fun Link dev eeL
Off This unit StdyS in standby mode even f you turn on
you1-connected fun-Link device.
Device List
[hs funct on lets you see the product model number or name
of connected dev ces.
fun-Link (HDMI CEC)
[his funct on allows you to operate the linked functions
between our brand dev ces with a fun Lnk feature and this
unt connecting through an HDNI cable.
1 Use _,/_' to select [fun-Link (HDMI CEC)],then press
OK.
2 Use &/Y to select the desired sett ng, then press OK.
3 Adjust the following items.
fun-Link Control
Set the fun Link [On] or [Off].
[he following additional settings will be grayed out when you
set to [Off].
Use &/Y to select the des red sett ng, then press OK.
On that s compatible with the fun Lnk funct OnL
Disab es all fun Lnk.
Auto Device Off
You can set your devce to turn off by interlock ng fi'om this
unt's power
Use &/Y to select the des red sett ng, then press OK.
Your connected fun Link device turns off
On automatically when the unit goes nto standby
mode.
Off Your connected fun Link device stays on even if
the unit goes into standby mode.
To Next Page
Loading...
