Emerson Liebert CRV - Figure 131 2 T Rack Sensors Installed on Neighboring Racks-600 Mm (24) Models

Remote Rack Sensor Wiring
Liebert
®
CRV
™
150
Figure 131 2T rack sensors installed on neighboring racks-600mm (24") models
12" (305mm)
Install temperature sensors on the
perforated portion of the rack door
using the supplied zip-ties.
Ensure that the door can swing freely
without binding the cables.
Approximate
center of rack;
in front of IT
equipment
2T Sensor Chain
DPN001983
Rev. 1
600mm (24") Liebert CRV’s shown;
arrangement is same for 300mm (12") units