Reference Manual MAS2600: Ordering Information
RM 6000-01-001-24 August 2023
18
Mounting Methods
MAS 2600 -XXX-XX-X/XX
Brackets for Internal Mounting (dwg no. P022P010)
The brackets are U-shaped and manufactured of 2 mm ASTM 316L plated steel. Diameter
of mounting holes: 11.5 mm. The transducer is secured by means of a spring fitted into two
holes in the “U” shape, and can be mounted/dismounted without the use of tools.
When installing in hazardous areas the cable must be protected by a steel pipe welded to
the tank.
Also consider not to install to close the pump inlets.
Note! Internal mounting in service tanks is not recommended due to limited possibili-
ties to perform service and maintenance.
Bulkhead
Tank bottom
TWO WI RE TRAN SMITTER
2600 SERIES
90-C.95948
T5
Cint = 10 nF
C
CERTIFICATE REF.:
4-20 mA
Lint = 20 uH
x
i
EE
X
a
MARINE AUTOMATION DENMARK
S/N:
Umax = 33 V
T
amb. : -40 t o +85 °C
I 45 mAK=
<
2600
Tank top
125.0
160.0
38.0
55.0
40.0
45.0
To Next Page
Loading...
