When complete, a Resetting to Factory Default Finished message
displays.
6.4 Function Check Failed
A functional check alert is commonly triggered due to the following conditions:
• Incorrect network settings configuration
• Out of paper
• Paper tray is open
• Printer already has six open connections
• Another transmitter tries to start a print while another transmitter is printing
Configuration items and audit log tickets can take more than 15 minutes to print and
use up paper. If during this time another transmitter starts a print, the new print may
either be rejected, causing a functional check alert (printer offline), or the print will be
inserted in the middle of the configuration/audit log print.
The functional check alert is cleared after a successful print.
Installation Manual Set up the printer
00825-0100-1600 March 2022
Installation Manual 33
To Next Page
Loading...
