9 Components of the transmitter
display
The transmitter display includes two status LEDs, a multi-line LCD panel, and four
membrane arrow keys — left, up, down, and right — used to access the display menus and
navigate the display screens.
Figure 9-1: 1600 transmitter display
A. Status LED
B. LCD Display
Status LEDs
The status LEDs indicate the current state of the transmitter (STATUS) and the current
state of the Ethernet network (NET). From the display, the symbol “√” on the right side is
the transmitter status LED. The symbol “NET” on the left side is the network status LED.
The 1600 status LED supports NE107 mode. For configuration information, see the Micro
Motion 1600 with Ethernet Transmitters: Configuration and Use Manual.
Installation Manual Components of the transmitter display
00825-0100-1600 March 2022
Installation Manual 39
To Next Page
Loading...
