Table 10-2: Ticket types for special applications (continued)
Special applications Available tickets
Standard Batch Batch (NTEP) Transfer
(OIML)
Batch (OIML)
Custody transfer application
(OIML)
X X
Available only if
the discrete
batch
application is
installed
Not a legal
receipt
X
Legal receipt
Custody transfer application
(OIML/batch)
The discrete batch application is
installed and approved.
X X
Legal receipt
X
Legal receipt
10.2 Wire the printer
For configurations that will use tickets, wire a printer to the Model 5700.
Procedure
Wire the RS232-RS485 adapter terminals to the Model 5700 terminals.
Converter
Terminals
K2 ADE • Wire the K2 ADE terminal 1 to Channel E, RS-485B, terminal 10
• Wire the K2 ADE terminal 2 to Channel E, RS-485A, terminal 9
K2 • Wire the K2 terminal 3 to Channel E, RS-485B, terminal 10
• Wire the K2 terminal 4 to Channel E, RS-485A, terminal 9
Figure 10-1: Wiring between the K2 terminals to the Model 5700 terminals
A. Transmitter with end-cap removed
Important
For a K2 ADE converter, use terminals 1 and 2 on the converter.
Configure, wire, and use a printer for tickets Configuration and Use Manual
March 2019 MMI-20025166
176 Micro Motion Model 5700 Transmitters with Configurable Outputs
To Next Page
Loading...
