Emerson Micro Motion Elite Coriolis Micro Motion Elite Coriolis CMF025 - Page 30

A. Shield folded back
B. Gland body
3.2.5 Connect the wires to the core processor terminals
After the 4-wire cable has been prepared and shielded (if required), connect the individual
wires of the 4-wire cable to the terminals on the core processor.
1. Connect the wires to the core processor terminals.
• If you are connecting to a standard core processor, use the following image and
connections:
A
B
D
C
AA
A. Terminal 1 (Power supply +): Red wire
B. Terminal 2 (Power supply -): Black wire
C. Terminal 3 (RS-485/A): White wire
D. Terminal 4 (RS-485/B): Green wire
• If you are connecting to an enhanced core processor, use the following image
and connections:
Transmitter power and I/O wiring
26 Micro Motion ELITE