14
ETL Model No.: CF955L
5. How to Wire Your Ceiling Fan (Continued)
FAN BLACK WIRE
SUPPLY BLACK
(
HOT)
LISTED WIRE
C
ONNECTOR
Figure 22
5.3
Securely connect the fan black wire to the supply black
(hot) wire using wire connector (supplied) (Figure 22).
BLACK WIRES
WHITE WIRES
GREEN
WIRES
Figure 23
5.4
After connections have been made, turn leads upward
and carefully push leads into the outlet box, with the white
and green leads on one side of the outlet box and position
the black leads on the other side of the outlet box
(Figure 23).
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until blades are in place. Noise and fan
damage could result.
WARNING
!
5.5
Screw the two threaded studs (supplied) into the tapped
holes in the hanger bracket (Figure 24).
Figure 24
Your fan is now wired to be turned on and off from the fan
switch.
To Next Page
Loading...
