Air Flow DrawingFigure 2-6:
2.5 Wiring
2.5.1 Field installation
WARNING!
Failure to follow these installation guidelines could result in death or serious injury. Ensure that
only qualified personnel perform the installation.
Electrical shock could cause death or serious injury. Use extreme caution when making contact
with the leads and terminals.
Do not open the transmitter, sensor, or junction box enclosure when in a classified area or
when an explosive atmosphere may be present unless the power to the transmitter has been
removed.
Avoid touching electronic components as they are susceptible to electrostatic discharge (ESD).
Refer to Chapter 6 for more information.
Avoid contact with the non-metallic enclosure label as contact may create an electrostatic
charging hazard.
Installation
9
To Next Page
Loading...
