1 Introduction
1.1 Models covered
The Air Particle Monitor (APM) is an infrared optical detector used in hazardous industrial
applications to monitor ambient air for the presence of particulate matter from products
of combustion such as carbon, air particulate matter, or ash.
The Millennium Transmitter is an environmentally protected electronic package contained
within an explosion-proof housing. With its scrolling 8-character display and status LEDs, it
provides instructions and status alerts.
The APM Sensor is mounted where airborne particles are anticipated to accumulate while
the Millennium Transmitter is located conveniently at eye level.
The product is available in aluminum and stainless steel (SS).
Models available are:
• MLP-AR-APM-OP - APM, 4-20mA analog output with alarm & fault relays, aluminum
housing, CSA approved
• MLP-AR-APM-OP-X - APM, 4-20mA analog output with alarm & fault relays,
aluminum housing, CSA, ATEX, and IECEx approved
• MLP-AR-APM-OP-SS - APM, 4-20mA analog output with alarm & fault relays,
stainless steel housing, CSA approved
• MLP-AR-APM-OP-SS-X - APM, 4-20mA analog output with alarm & fault relays,
stainless steel housing, CSA, ATEX, and IECEx approved
1.2
Service support
Technical support for this product can be provided by contacting your local Emerson/Net
Safety representative or by contacting the Net Safety Technical Support department at:
Toll Free + 866 347 3427 or Safety.CSC@emerson.com.
1.3
Return of material
To expedite the repair and return of this product, proper communication between the
customer and the factory is important. Before returning a product for repair, call +1 403
219-0688 or e-mail Safety.CSC@emerson.com for a Material Return Authorization (MRA)
number.
On the return of the equipment, include the following information:
Procedure
1. MRA number provided to you by Net Safety
Introduction
1
To Next Page
Loading...
