15 PACSystems™ RX3i 64 MB CPU w/Ethernet Quick Start Guide GFK-2941K
Module Start-up
You Will Need:
▪ An RX3i Universal Backplane: IC695CHS007, IC695CHS012 or
IC695CHS016.
▪ This PACSystems RX3i CPU. This CPU occupies two backplane slots.
▪ An RX3i rack-mounted Power Supply Module and compatible power
source
(AC
or DC).
▪ A computer running PAC Machine Edition (PME) configuration and
programming software. PME Version 9.70 SIM 16 or later supports all
features in this document.
▪ Ethernet cable for connecting the PME programmer computer to the
RX3i CPU.
▪ Phillip’s head screwdriver.
▪ A very small slotted screwdriver (1.4 mm jeweler’s size).
On lightly-loaded racks, use IC695PSA040H or later, or IC695PSA140D or later, otherwise power-
up may be unsuccessful. Alternately, fill out the empty slots in the rack to draw more current.
To Next Page
Loading...
