September 2017
4
Quick Start Guide
Straight run requirements
(1)
Figure 2. Reducer
(2 d to d over a length of 1.5 d to 3 d)
Figure 3. Single 90° Bend Flow from One Branch
Figure 4. Two or More 90° Bends in Same Planes
Figure 5. Two or More 90° Bends in Different Planes
Figure 6. Expander
(0.5 d to d over a length of d to 2 d)
1. For dimensions, see Table 1 on page 5.
U D
U D
00825-0100-4686 FA.fm Page 4 Thursday, September 21, 2017 10:45 AM
To Next Page
Loading...
