Rosemount Model 1195/ProPlate/Mass ProPlate
10-8
Mounting Position Effect
Zero shifts up to 2.5” ws (0.62kPa), which can be calibrated out.
No span effect.
Physical Specifications Electrical Considerations
½–14 NPT, PG 13.5, and CM20 conduit. HART interface connections
permanently fixed to terminal block.
Process-Wetted Parts
Sensor
316/316L SST.
Integral manifolds
316 SST.
Remote Manifolds
316SST or CS.
Electronics Vent Valves and Process Flanges
316 SST.
Process Isolating Diaphragms
316L SST.
O-rings
Glass-filled TFE.
Integral Manifold O-Rings
Teflon.
Non-Wetted Parts
Electronic Housing
Low copper aluminum, NEMA 4x, IP65.
Paint
Polyurethane.
Bolts
(Integral Manifold & Electronics Process Flange) 316 SST.
Sensor Module Fill Fluid
Silicone oil.
Cover O-Rings
Buna-N.
Remote Mounting Bracket
All SST.
Sensor Mounting (including nuts, bolts and gasket)
CS (SS optional).
To Next Page
Loading...
