Table 6-2: Device Dashboard Fast Keys (continued)
Function Fast Key sequence
Field Revision Rev 3 Rev 5 Rev 7
HART Revision HART 5 HART 5 HART 7
✓ Transfer Function 2,2,1,3 2,2,1,1,6 2,2,1,1,6
✓ Units 2,2,1,1 2,2,1,1,4 2,2,1,1,4
Burst Mode 2,2,4,1 2,2,5,3 2,2,5,3
Custom Display
Configuration
2,2,3 2,2,4 2,2,4
Date 2,2,6,1,4 2,2,7,1,3 2,2,7,1,4
Descriptor 2,2,6,1,5 2,2,7,1,4 2,2,7,1,5
Digital to Analog Trim
(4-20 mA Output)
3,4,2 3,4,2 3,4,2
Disable Configuration
Buttons
2,2,5,2 2,2,6,3 2,2,6,3
Rerange with Keypad 2,2,2 2,2,2,1 2,2,2,1
Loop Test 3,5,1 3,5,1 3,5,1
Upper Sensor Trim 3,4,1,1 3,4,1,1 3,4,1,1
Lower Sensor Trim 3,4,1,2 3,4,1,2 3,4,1,2
Message 2,2,6,1,5 2,2,7,1,5 2,2,7,1,6
Sensor Temperature/Trend 3,3,2 3,3,3 3,3,3
Digital Zero Trim 3,4,1,3 3,4,1,3 3,4,1,3
Password N/A 2,2,6,4 2,2,6,5
Scaled Variable N/A 3,2,2 3,2,2
HART Revision 5 to HART
Revision 7 switch
N/A 2,2,5,2,3 2,2,5,2,3
Long Tag N/A N/A 2,2,7,1,2
Find Device N/A N/A 3,4,5
Simulate Digital Signal N/A N/A 3,4,5
6.3 Verifying configuration with LOI
The optional LOI can be used for commissioning the device. The LOI is a two-
button design with internal and external buttons. The internal buttons are
located on the display of the transmitter, while the external buttons are
Quick Start Guide May 2019
16 Emerson.com/Rosemount
To Next Page
Loading...
