Reference Manual
00809-0100-4690, Rev FC
June 2011
Rosemount 2088 and 2090
www.rosemount.com
Appendix B Approval Information
OVERVIEW This Appendix contains information on approved manufacturing locations,
European directive information. Ordinary Location certification, Hazardous
Locations Certifications and approval drawings.
Approved Manufacturing
Locations
Rosemount Inc. — Chanhassen, Minnesota USA
Emerson Process Management GmbH & Co. — Wessling, Germany
Emerson Process Management Asia Pacific Private Limited — Singapore
Beijing Rosemount Far East Instrument Co., LTD — Beijing, China
European Directive
Information
The EC declaration of conformity for all applicable European directives for this
product can be found on the Rosemount website at www.rosemount.com. A
hard copy may be obtained by contacting our local sales office.
ATEX Directive (94/9/EC)
Emerson Process Management complies with the ATEX Directive.
European Pressure Equipment Directive (PED) (97/23/EC)
2088/2090 Pressure Transmitters
— Sound Engineering Practice
Electro Magnetic Compatibility (EMC) (2004/108/EC)
All Model 2088/2090 Pressure Transmitter:
EN 61326-1:2006
Hazardous Locations
Certifications
North American Certifications
Factory Mutual (FM)
E5 Explosion-proof for Class I, Division 1, Groups B, C, and D.
Dust-Ignition-Proof for Class II, Division 1, Groups E, F, G, Class III,
Division 1, indoor and outdoor (NEMA 4X) hazardous locations; factory
sealed. Temperature Class T5 Ta = 85 °C.
I5 Intrinsically safe for use in Class I, Division 1, Groups A, B, C, D; Class II,
Division 1, Groups E, F, and G; and Class III, Division 1 when connected
in accordance with Rosemount drawing 02088-1018. Non-incendive for
Class I, Division 2, Groups A, B, C, and D. Temperature Class T4 Ta = 85
°C; indoor and outdoor (NEMA 4X) hazardous locations.
For input parameters see control drawing 02088-1018.
Canadian Standards Association (CSA)
2088 CSA hazardous approved transmitters are certified per ANSI/ISA
12.27.01-2003.
To Next Page
Loading...
