Reference Manual
00809-0100-4690, Rev FC
June 2011
Rosemount 2088 and 2090
www.rosemount.com
Section 1 Introduction
Using this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-1
Service Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-1
Models Covered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-2
USING THIS MANUAL The sections in this manual provide information on installing, operating, and
maintaining Rosemount 2088, 2090F, and 2090P pressure transmitters with
HART
®
protocol. The sections are organized as follows:
• Section 2: Installation contains mechanical and electrical installation
instructions.
• Section 3: Configuration provides instruction on commissioning and
operating Rosemount 2088, 2090F, and 2090P transmitters.
Information on software functions, configuration parameters, and online
variables is also included.
• Section 4: Operation and Maintenance contains operation and
maintenance techniques.
• Section 5: Troubleshooting provides troubleshooting techniques for
the most common operating information.
• Appendix A: Reference Data supplies reference and specification
data, as well as ordering information.
• Appendix B: Approval Information contains intrinsic safety approval
information, European ATEX directive information, and approval
drawings.
• Appendix C: Glossary
SERVICE SUPPORT To expedite the return process outside of the United States, contact the
nearest Emerson Process Management representative.
Within the United States, call the Emerson Process Management Instrument
and Valves Response Center using the 1-800-654-RSMT (7768) toll-free
number. This center, available 24 hours a day, will assist you with any needed
information or materials.
To Next Page
Loading...
