Figure 5-1: Traditional Interface
Figure 5-2: Device Dashboard
Table 5-1: Traditional Interface Fast Key
A check (✓) indicates the basic configuration parameters. At minimum, these parameters should
be verified as part of the configuration and startup procedure.
Function Fast Key sequence
✓ Analog Output Alarm 1, 4, 3, 2, 4
Burst Mode Control 1, 4, 3, 3, 3
Burst Option 1, 4, 3, 3, 4
Calibration 1, 2, 3
✓ Damping 1, 3, 5
Date 1, 3, 4,1
Descriptor 1, 3, 4, 2
Digital To Analog Trim (4–20 mA Output) 1, 2, 3,2,1
Disable Local Span/Zero Adjustment 1, 4, 4, 1, 7
Field Device Info 1,4, 4, 1
March 2022 Quick Start Guide
Quick Start Guide 15
To Next Page
Loading...
