1.2 Symbols
Table 1-1: Symbols
The CE marking symbolizes the conformity of the product with the applicable
European Community Directives.
The EU-Type Examination Certificate is a statement of a Notified Certification
Body declaring that this product meets the Essential Health and Safety
Requirements of the ATEX directive
The FM APPROVED Mark indicates that the equipment is approved by
FM Approvals according to applicable Approval Standards and is applicable for
installation in hazardous locations
Protective Earth
Ground
Caution - see reference manual
Use wiring rated for maximum ambient temperature + 15 °C
Examples:
For connections in ambient temperatures up to 70 °C use wiring rated 85 °C
minimum.
For connections in ambient temperatures up to 60 °C use wiring rated 75 °C
minimum.
For connections in ambient temperatures up to 50 °C use wiring rated 65 °C
minimum.
Introduction Reference Manual
December 2019 00809-0100-2410
6 Reference Manual
To Next Page
Loading...
