5.6 Specifying display variables
The Rosemount 2410 can be configured to present measurement data on the optional
integral display. Measurement data such as Level, Level Rate, Free Water Level and many
other tank variables can be displayed.
Measurement units for Level, Volume, Temperature, Density, Pressure, and Weight can be
specified.
The display will alternate between the selected items at a rate given by the Display Toggle
Time parameter.
When the Rosemount 2410 is installed and configured, the display can easily be set up
with the Rosemount TankMaster WinSetup program to show tanks and measurement
variables. The current display settings can be changed at any time in the Rosemount 2410
Local Display window as shown below:
Procedure
1. In the Rosemount TankMaster WinSetup configuration program, right-click the
Rosemount 2410 icon.
2. Choose the Properties option.
3. In the Rosemount 2410 Tank Hub window, select the Local Display tab.
4. Select the desired tanks and tank parameters such as Level, Temperature, Vapor
Pressure, or any other preferred tank parameter.
5. Choose measurement units for the Rosemount 2410 integral display.
The first time the Local Display tab is opened, the same measurement units are used
as specified in the TankMaster WinSetup Server Preferences/Units window.
Reference Manual
Operation
00809-0100-2410 December 2019
Rosemount 2410 Tank Hub 77
To Next Page
Loading...
